John Deere X570 Problems

When you buy via links on our site, we may earn an affiliate commission at no cost to you. Learn more.

The John Deere X570 comes with large tires to traverse uneven grounds, and a 24HP V-twin engine to enhance smooth operation. Also, it can travel faster than several lawn tractors out there.

Despite these fascinating features, some John Deere X570 users have complained about engine issues, steering issues, uneven cuts and more.

In this article, I look at 7 John Deere X570 problems, causes and possible solutions that can help you fix the issue.

John Deere X570 Problems, Causes, and Possible Solutions

John-Deere-X570-lawn-mower

Before I go into details, let’s look at some common John Deere X570 problems and their possible solutions.

Problems

Possible Solutions

1. John Deere X570 Steering Problems

  • Replace the loose bolt.
  • Replace the worn bushings 

2. Transmission Problems

  • Replace worn-out gear solenoids.
  • Inspect the fluid level and contact a John Deere dealer for fluid replacement.
  • Contact a professional to troubleshoot any leakage in the transmission.

3. John Deere X570 Mower Deck Problems

  • Avoid mowing wet grass
  • Install the belt properly.
  • Use a slower speed while mowing.
  • Replace the dull or damaged lawn tractor blades
  • Check and adjust the tractor’s deck height
  • Empty the grass bag.
  • Replace the dull blades.
  • Adjust and level the deck.
  • Inflate tires.

4. Belt Problem

  • Clean the pulley.
  • Inspect and replace the worn-out mower belt.
  • Check and adjust the belt tension.

5. John Deere Electrical System Problems

  • Inspect and clean the dirty cables and battery terminals.
  • Change the mower battery.
  • Contact a technician to fix bad wiring.
  • Replace the defective light bulbs.

6. Engine Problems

  • Replace the faulty fuel pump.
  • Change the bad governor.
  • Remove excess oil
  • Replace clogged fuel and air filters.
  • Loads should be reduced.
  • Clean the dirty cooling fins
  • Add or drain engine oil
  • Change the oil
  • Replace the mower battery.
  • Clean the battery cable terminals and tighten all cable connections.
  • Replace the faulty spark plug.
  • Change the main fuse
  • Fill your gas tank if it is empty
  • Drain the bad gas and fill it with a fresh one
  • Replace the fuel filter with a new one.

7. John Deere X570 Lawn Tractor Will Not Move with Engine Running

  • Add oil as recommended by John Deere
  • Balance your lawn tractor blades and fasten them to secure them properly.
  • Release the parking brake.

1. John Deere X570 Steering Problems

John-Deere-mower-steering

The John Deere X570 may become difficult to steer while mowing. It may be that the bushings that hold the pinion gear in place are worn.

Friction can cause these bushings to wear out. Another likely reason for this problem is a loose bolt. However, you can easily solve these steering problems by replacing the defective components.

Causes

  • Loose bolts
  • Worn bushing

Fix

  • Replace the loose bolt.
  • Replace the worn bushings with new ones.

2. Transmission Problems

The John Deere lawn tractor comes with a hydrostatic transmission that is powered by hydraulic fluid. It enhances a smoother ride and gives you better control.

If you have an issue with your transmission, the likely causes include insufficient transmission oil, leaks and worn-out gear solenoids.

Causes

  • Worn-out gear solenoids.
  • Inadequate transmission oil
  • Leakage from the transmission

Fix

  • Replace worn-out gear solenoids.
  • Inspect the fluid level. If the fluid level is too low, do not top it up yourself. Contact a John Deere dealer for fluid replacement.
  • Contact a professional to troubleshoot any leakage in the transmission.

3. John Deere X570 Mower Deck Problems

John-Deere-mower-deck

Some of the problems that are associated with the cutting deck include:

Plugged Discharge Chute

Grass clippings and other debris can block the discharge system of your lawn tractor model. 

In this case, the tractor won’t be able to discharge grass clippings properly due to the restriction of airflow.

Causes

  • Wet grass
  • Improper belt installation
  • Speed is too high

Fix

  • Avoid mowing wet grass
  • Install the belt properly.
  • Use a slower speed while mowing.

Patches of Uncut Grass

If your cutting deck is faulty, it can cause it to leave patches of uncut grass. Apart from the cutting deck itself, examine other components such as grass bag and blades for defects.

Causes

  • Dull or damaged blades
  • The cutting deck is low
  • Grass bag is overfilled

Fix

  • Replace the dull or damaged lawn tractor blades
  • Check and adjust the tractor’s deck height
  • Empty the grass bag.

Uneven Cut

Your John Deere X570 model can leave uneven cutting results on your lawn due to insufficient tire pressure, dull blades or a mower deck that isn’t leveled properly. This will make the lawn look untidy and unattractive

Causes

  • Dull blades
  • The deck level is too low
  • Insufficient tire pressure

Fix

  • Replace the dull blades with new ones.
  • Adjust and level the deck of the lawn tractor.
  • Inflate tires when necessary.

4. Belt Problem

Over time, your John Deere lawn mower belt may become defective or worn, causing it to slip off the pulleys. Ensure that you take safety precautions before changing the mower belt on the lawn tractor.

Causes

Fix

  • Ensure that you clean the pulley.
  • Inspect and replace the worn-out mower belt with a new one
  • Check and adjust the belt tension.

5. John Deere Electrical System Problems

If you notice that the electrical system of your John Deere tractor is malfunctioning, you need to check the battery, starter, and lights for faults.

Here is an overview of John Deere’s electrical problems:

Battery Does Not Charge

The battery of your lawn tractor may fail to charge if one or several battery cells are defective or the cables and battery terminals are dirty. 

In this case, it will hinder the performance of the lawn tractor.

Causes

  • Dirty cables or battery terminals
  • Defective battery cell(s).

Fix

  • Inspect and clean the dirty cables and battery terminals.
  • Change the mower battery.

Lights Do Not Work

If the lights of your John Deere X570 model do not work well, check the light bulbs and wiring of the lawn tractor.  

Causes

  • Bad wiring
  • Defective light bulbs

Fix

  • Contact a technician to fix the issue of bad wiring.
  • Replace the defective light bulbs with new ones.

6. Engine Problems

Some issues that are associated with the John Deere tractor engine include:

Loss of Power

Some John Deere owners attested that their lawn tractors lost power, especially when mowing on hilly terrain. Some X500 users have also complained of a similar problem.

To troubleshoot the issue, you need to examine lawn mower parts such as the carburetor, fuel pump, fuel tank, and spark plugs.

Causes

  • Faulty fuel pump
  • Defective governor
  • Overfilling the oil
  • Clogged fuel and air filter

Fix

  • Replace the faulty fuel pump with a new one
  • Change the bad governor.
  • Remove excess oil
  • Replace clogged fuel and air filters.

Engine Overheating

Several John Deere X570 users complained about engine overheating. Several reasons such as a low oil level, blocked cooling fins and excessive load can cause overheating. 

It is advisable to leave your John Deere tractor for up to 20-30 minutes before working on it.

Causes

  • Excessive engine load
  • Blocked cooling fins
  • Engine oil is too low or high
  • Incorrect engine oil viscosity

Fix

  • Loads should be reduced.
  • Clean the dirty cooling fins
  • Add or drain engine oil
  • Change the oil if you discover that you are using an incorrect engine oil viscosity.

Engine Doesn’t Start or is Hard To Start

Many John Deere X570 users have complained about the starting difficulties of the tractor’s engine. 

If the engine does not start or it is hard to start, you need to start by checking the electrical connections and batteries to diagnose the problem. You can also check other components such as a spark plug and fuel filter

Causes

  • Defective battery
  • Damaged electrical connections
  • Faulty spark plug
  • Defective main fuse and connections
  • No fuel in the tank
  • Stale or bad gas
  • Plugged fuel filter

Fix

  • Ensure that your batteries are charging and they should hold a charge. If they drain too fast, make sure you replace them.
  • Clean the battery cable terminals and tighten all cable connections.
  • Replace the faulty spark plug with a new one
  • Replace the main fuse
  • Fill your gas tank if it is empty
  • Drain the bad gas and fill it with a fresh one
  • Replace the fuel filter with a new one.

7. John Deere X570 Lawn Tractor Will Not Move With Engine Running

If you notice that your lawn tractor isn’t moving and the engine is still operating, you need to check your parking brake, transmission and blades to identify the cause and troubleshoot the issue.

Causes

  • Lack of oil in the transmission
  • Unbalanced and loose blades
  • Parking blade holds the tractor

Fix

  • Add oil as recommended by John Deere
  • Balance your lawn tractor blades and fasten them to secure them properly.
  • Release the parking brake.

What Majority of the Users Feel About John Deere X570?

According to several users, the John Deere X570 lawn tractor model is easy to use and it delivers good performance on sloped terrain.

On the downside, some people found it difficult to mow long grasses with the lawn tractor. Apart from that, the John Deere X570 lawn tractor is durable and powerful.

Frequently Asked Questions 

Where is the John Deere X570 made?

A: The John Deere lawn tractor is made in Horicon, Wisconsin, United States of America.

Who makes the engine in the John Deere X570?

A: The engine used by the John Deere X570 is made by Kawasaki.

Conclusion

Engine problems, mower deck issues, steering problems, and electrical system issues are common problems with the John Deere X570 lawn tractor.

Follow our troubleshooting guide to fix your John Deere lawn tractor so that it can work efficiently again. If the problem persists, it is best to contact a technician to fix the issue.